OPERATING INSTRUCTIONS
GENERAL SPECIFICATIONS
Volume:
Volume is controlled by the audio source device.
The SpotDAP unit is designed to accept line level stereo
audio input into the RCA style connectors from audio
sources such as CD players, DVD players, stereos, or other
multimedia devices. These devices must have volume
control in order to adjust the output level of the SpotDAP
unit.
When the SpotDAP unit detects that the incoming signal is
greatly beyond the input rating of the unit, it automatically
lowers the signal until the user can adjust the input level to
within limits. The Limiter recovery is typically only for a few
seconds. Adjust source volume level to reduce limiting
frequency for the most consistent output volume. The
Status LED will flash red when the limiter is working.
ELECTRICAL
AC Power Cord Length 1.83 m (6 ft.)
POWER REQUIREMENTS
Wattage: 100 watts maximum
ELECTRICAL RATINGS
Input 100V~240V AC
Universal power supply, 50V~60 Hz
Output 48V DC @ 1.5 Amps maximum
MECHANICAL
Physical Dimensions: Depth (Front-Back) Height (Top-Bottom) Width (Left-Right)
SpotDAP450 3.47” x 5.96” x 12.25”
88.1mm x 151.4mm x 311.1 mm
SpotDAP460 3” x 12.25” x 12.25”
76.2 mm x 311.1mm x 311.1 mm
SHIPPING WEIGHT (Approximate)
SpotDAP450
6lbs
SpotDAP460
10lbs
UNIT WEIGHT
SpotDAP450
2.2 lbs
SpotDAP460
4.5 lbs
17
6
