background image

10

•  Do not press Pair on the rear of the 

subwoofer, except for manual pairing.

Manual Pairing

If no audio from the wireless subwoofer can be 

heard, manually pair up the subwoofer.

Unplug both units from the mains sockets 

again, then plug them in again after 3 minutes.

Press and hold the 

PAIR 

button on the 

rear of the subwoofer for a few seconds.

 

»

The Pair indicator on the subwoofer 

will rapidly blink.

Then press 

 

 on the unit or remote 

control to switch the unit ON. 

 

»

The 

Pair

 indicator on the subwoofer 

will become solid when successful.

If the Pair indicator still keeps blinking, 

repeat step 1-3.

Tips

 

The subwoofer should be within 6 m of the Soundbar 

in an open area (the closer the better).

 

Remove any objects between the subwoofer and the 

Soundbar.

 

If the wireless connection fails again, check if there is a 

conflict or strong interference (e. g. interference from 

an electronic device) around the location. Remove 

these conflicts or strong interferences and repeat the 

above procedures.

 

If the main unit is not connected with the subwoofer 

and it is in ON mode, the unit’s POWER indicator will 

flash.

AUX

R

L

AUDIO OUT

•  Use a RCA to 3.5mm audio cable (not 

included) to connect the TV’s audio output 

sockets to the AUX socket on the unit.

Connect to Power

•  Before connecting the AC power cord, 

ensure you have completed all other 

connections.

• 

Risk of product damage! 

Ensure that the 

power supply voltage corresponds to 

the voltage printed on the back or the 

underside of the unit.

•  Connect the mains cable to the AC~ Socket 

of the unit and then into a mains socket

•  Connect the mains cable to the AC~ 

Socket of the subwoofer and then into a 

mains socket.

Pair up with the subwoofer

Automatic Pairing

Plug the Soundbar and the subwoofer into the 

mains sockets and then press on the unit or 

remote control to switch the unit to 

ON

 mode. 

The subwoofer and Soundbar will automatically 

pair.

•  When the subwoofer is pairing with 

the Soundbar, the 

Pair

 indicator on the 

subwoofer will flash fast.

•  When the subwoofer is paired with 

the Soundbar, the Pair indicator on the 

subwoofer will light up steadily.

Summary of Contents for HTL3310


















Reviews: