background image

English

3

1 Important

Read and understand all instructions before you 

use your product. If damage is caused by failure 

to follow instructions, the warranty does not 

apply.

Safety

Risk of electric shock or fire!

Before you make or change any

connections, make sure that all devices are

disconnected from the power outlet.

Never expose the product and accessories

to rain or water. Never place liquid

containers, such as vases, near the product. 

If liquids are spilt on or into the product, 

disconnect it from the power outlet

immediately. Contact Consumer Care to

have the product checked before use.

Never place the product and accessories

near naked flames or other heat sources, 

including direct sunlight.

Never insert objects into the ventilation

slots or other openings on the product.

Where the mains plug or an appliance

coupler is used as the disconnect device, 

the disconnect device shall remain readily

operable.

Battery (battery pack or batteries installed)

shall not be exposed to excessive heat

such as sunshine, fire or the like.

Disconnect the product from the power

outlet before lightning storms. 

When you disconnect the power cord, 

always pull the plug, never the cable. 

Risk of short circuit or fire!

For identification and supply ratings, see

the type plate at the back or bottom of

the product.

Before you connect the product to the

power outlet, ensure that the power

voltage matches the value printed on the

back or bottom of the product. Never 

connect the product to the power outlet if 

the voltage is different.

Risk of injury or damage to this product!

For wall mounting, this product must be

securely attached to the wall in accordance

with the installation instructions. Use

only the supplied wall mount bracket (if

available). Improper wall mounting may

result in accident, injury or damage. If you

have any query, contact Consumer Care in

your country.

Never place the product or any objects

on power cords or on other electrical

equipment. 

If the product is transported in

temperatures below 5°C, unpack the

product and wait until its temperature

matches room temperature before

connecting it to the power outlet. 

Parts of this product can be made of

glass. Handle with care to avoid injury and

damage.

Risk of overheating!

Never install this product in a confined

space. Always leave a space of at least four

inches around the product for ventilation. 

Ensure curtains or other objects never

cover the ventilation slots on the product. 

Risk of contamination!

Do not mix batteries (old and new or

carbon and alkaine, etc.).

CAUTION: Danger of explosion if

batteries are incorrectly replaced. Replace

only with the same or equivalent type.

Remove batteries if they are exhausted or

if the remote control is not to be used for

a long time.

Batteries contain chemical substances, they

should be disposed of properly. 

Risk of swallowing batteries!

The product/remote control may contain

a coin/button type battery, which can be

swallowed. Keep the battery out of reach

of children at all times! If swallowed, the

Summary of Contents for HTL3310


















Reviews: