background image

4

battery can cause serious injury or death. 

Severe internal burns can occur within two 

hours of ingestion.

If you suspect that a battery has been

swallowed or placed inside any part of the

body, seek immediate medical attention.

When you change the batteries, always

keep all new and used batteries out of

reach of children. Ensure that the battery

compartment is completely secure after

you replace the battery.

If the battery compartment cannot be

completely secured, discontinue use of the

product. Keep out of reach of children and

contact the manufacturer.

The apparatus shall not be exposed to

dripping or splashing and that no objects

filled with liquids, such as vases, shall be

placed on the apparatus

This is CLASS II apparatus with double 

insulation, and no protective earth provided.

Care for your product

 Use only microfiber cloth to clean the product.

Care of the environment

Disposal of your old product and battery

Your product is designed and manufactured 

with high quality materials and components, 

which can be recycled and reused.

This symbol on a product means that the 

product is covered by European Directive 

2012/19/EU.

This symbol means that the product contains 

batteries covered by European Directive 

2013/56/EU which cannot be disposed of with 

normal household waste.

Inform yourself about the local separate 

collection system for electrical and electronic 

products and batteries. Follow local rules and 

never dispose of the product and batteries  

with normal household waste. Correct disposal 

of old products and batteries helps prevent 

negative consequences for the environment and 

human health.

Removing the disposable batteries

To remove the disposable batteries, see battery 

installation section.

Summary of Contents for HTL3310


















Reviews: