6
Preparations
Prepare the Remote Control
The provided Remote Control allows the unit to be operated from a distance.
• Even if the Remote Control is operated within the effective range (6m), remote control operation
may be impossible if there are any obstacles between the unit and the remote control.
• If the Remote Control is operated near other products which generate infrared rays, or if other
remote control devices using infra-red rays are used near the unit, it may operate incorrectly.
Conversely, the other products may operate incorrectly.
• First-time use:
The unit has a pre-installed lithium CR2025 battery. Remove the
protective tab to activate the remote control battery.
Replace the Remote Control Battery
1 Pull out the battery tray and remove the old battery.
2 Place a new CR2025 battery into the battery tray with correct
polarity (+/-) as indicated.
3 Insert the battery tray back into the slot.
Precautions Concerning Batteries
• When the Remote Control is not to be used for a long time (more
than a month), remove the battery from the Remote Control to
prevent it from leaking.
• If the batteries leak, wipe away the leakage inside the battery
compartment and replace the batteries with new ones.
• Do not use any batteries other than those specified.
• Do not heat or disassemble batteries.
Never throw them in fire or water.
• Do not carry or store batteries with other metallic objects. Doing
so could cause batteries to short circuit, leak or explode.
• Never recharge a battery unless it is confirmed to be a
rechargeable type.
Connections
Use the HDMI ARC socket
The ARC (Audio Return Channel) function allows
you to send audio from your ARC- compliant
TV to your sound bar through a single HDMI
connection. To enjoy the ARC function, please
ensure your TV is both HDMI-CEC and ARC
compliant and set up accordingly. When correctly
set up, you can use your TV remote control to
adjust the volume output (VOL +/- and MUTE) of
the sound bar.
- Connect the HDMI cable (not included) from
unit's
HDMI (ARC)
socket to the HDMI (ARC)
socket on your ARC compliant TV. Then press the
remote control to select
HDMI ARC
.
1
2
4
3
56:/)'2
.*3/'
8)
.*3/'8)
.KGJVNUTK
