AUX
Socket
HDMI ARC
Socket
SERVICE ONLY
Socket
AC~
Socket
OPTICAL
Socket
COAXIAL
Socket
4.
Product Description
Front View
Rear View
2.
Standard Accessories
Wall bracket screws
3.
Preparations
Wall Bracket
3.5mm-3.5mm
audio Cable
Sound Bar
Quick Start Guide
TB355
2.1 Channel Sound Bar with built-in subwoofer
1.
Specifications
Sound Bar
Power Requirements: AC 120V~ 60Hz
Power Consumption: 30 W
Output Power: 15W x 2
Audio Input Sensitivity: 500mV
Frequency Response: 40Hz - 20kHz
Speaker Impedance: 4Ω x 2 + 4Ω
Unit Dimension (W x H x D):
34.3 x 2.4 x 4.5 inch
872 x 60 x 113 mm
Remote Control
Distance/Angle: 19.7 feet (6m) / 30°
Battery Type: CR2025
Optical Cable
HDMI Cable
Remote
Control
Replacing the Remote Control Battery:
First-time use：
The battery (batteries or battery pack)
shall not be exposed to excessive heat
such as sunshine, fire or the like.
Remove the protective
tab to activate the
remote control battery.
Standby/ON
• When you first connect the unit to the power outlet,
the unit will be in STANDBY mode.
• Press the button on the remote control to switch
the main unit ON or OFF.
• Disconnect the power Cord from the power outlet if
you want to switch the unit off completely.
- If a TV or an external device is connected, the unit will
switch on automatically when the TV or the external
device is switched on.
- When the unit has no input signal for over 15 minutes,
the unit will automatically switch to Standby mode.
Adjust the Volume
- Press the VOL+ / VOL- buttons to adjust the volume.
- If you wish to turn the sound off, press the MUTE button
on the remote control. Press the MUTE button again or
press the VOL+ / VOL- buttons on the unit or on the
remote control to resume listening.
- While adjusting the volume, the status indicator flashes
quickly.
- While the volume level reaches its maximum level, if you
press the VOL+ button again, the status indicator flashes
once. While the volume level reaches its minimum level,
if you press the VOL- button again, the status indicator
flashes once.
7.
Bluetooth Operation
6.
AUX Operation
5.
General Operation
Select the play function/mode
Mute or resume the sound
Increase the volume.
Decrease the volume.
Turn on / turn off
AUX BT
OPTICAL
COAXIAL
HDMI ARC
Previous track
Next track
Start/pause play
Activate Bluetooth pairing
Select a preset sound effect/
Equalizer Setting
Remote Control
EQ
VOL+
VOL -
MUTE
BF
/
PAIR
Connect to an external audio device.
User Manual
Quick Start Guide
Wall Mount Guide
Headphone
(not included)
AUX
TV
Bluetooth Max. distance
26 feet (8m).
RSR TB355
0000
PIN
If device ask you
to enter PIN,
use code 0000
BT
Flashing slowly: not connected
Flashing quickly: pairing mode
Solid: successfully connected
Power Cable
Turn on / turn off
Select the play
function/mode
Select a preset sound effect/
Equalizer Setting
Increase the volume.
Decrease the volume.
Remote Control Sensor
Before connecting the AC power
cord, ensure you have completed
all other connections.
The actual supply voltage is
120V~ 60Hz.
AUX
BT
LED Indicators
