18
Doc. No.
：
P30001PE0101-07
4.3.
Internal Components
The Magtration
®
unit and stage unit are located inside the instrument.
1.
Magtration
®
Unit
➢
Syringe Unit
：
Twelve nozzles for simultaneous processing of up to 12 samples
with accurate and rapid aspiration and dispensing.
➢
Magnets
：
Twelve magnets aligned with 12 tips for simultaneous separation of
magnetic particles from up to 12 samples.
2.
Stage Unit
➢
Reagent Cartridges
：
Simple placement of special disposable cartridges
pre-filled with reagents minimizes cross-contamination.
The back two positions (wells) in the cartridge are used for heating.
➢
Tip Sets
：
Positions for tips (DN100N tips) in the tip sheath. One or two tips or
tip sheath (Sheath DN100) are used per sample depending on the protocol.
Refer the instructions provided in the package insert for the reagent kit.
➢
Elution Tubes
：
Positions for Micro tube.
➢
Sample Tubes
：
Positions for Micro tube.
Syringe Unit
Magnets
Sample Tubes
Elution Tubes
Tip Sets
(magLEAD Tip and Sheath
set)
Reagent Cartridges
UV lamp Unit
