DT2306 Potentiometer Data Logger Manual
ELM0075B
Page 15
T
ABLE
4-2
S
ENSORS TAB OPTIONS AND DESCRIPTION
S
ETTING
A
PPLICATION
Conversion Method
Select 'Coefficient Input' to calculate engineering values using linear conversion.
Select 'Range Input' to automatically calculate coefficient parameters given range
values.
Units Conversion
Select 'Units Conversion' to apply a user defined output offset value and output units.
The conversion will be done automatically resulting in desired units displayed in the
Monitor tab and recorded in the downloaded file data.
Display Format
Click to customize monitor display settings
– alter precision or switch to scientific display.
Upload to Logger
Click to update logger with current sensor settings.
Note
: 'Upload to Logger'
must
be clicked to update logger with new settings.
CAUTION: DATA LOSS WARNING
T
HE PROGRAM WILL PROMPT THE USER TO RESTART LOGGING OR
ERASE DATA CURRENTLY CONTAINED IN THE LOGGER
.
C
URRENT
READINGS AND ALL PREVIOUS DATA
WITH
CURRENT
SENSOR
CALIBRATION
SETTINGS
WILL BE DOWNLOADED TO A
*.
CSV FILE
NEXT TIME DATA IS COLLECTED IF THE LOGGER MEMORY IS
NOT
ERASED
.
Save to File
Click to save current sensor settings to file for later retrieval.
Load from File
Click to load previously saved sensor settings.
CAUTION
:
D
O
NOT
DISCONNECT THE LOGGER BEFORE EXITING THE SOFTWARE
.
4.6
C
ONNECTIONS
T
AB
The connections tab allows the user to change logger settings and access advanced
features.
Advanced features should be used only with the assistance of RST Instruments
technical personnel. Contact RST for more information.
