16
www.repo.eu
Technical Manual - RVL-N Single Wire Loop Box v16.5.2014
6.2.2 ReiNFoRceMeNt oF tHe coNcRete eLeMeNt
The wall elements must be reinforced according to the wall element design.
1) When RVL wire rope loops are used to transfer forces
When RVL wire rope loops are used to transfer forces in the joint, anchorage of the wire rope
loop must be secured by overlapping the wire rope loop sufficiently with the reinforcement of
the concrete element. For wire rope loops RVL 60-N the greatest design value for tensile force is
F
Rd
= 15 kN. The anchorage of the wire rope loops must be designed for these forces when using
design values for resistances presented in tables 2…8.
16
PICTuRE 11
|
Example of element edge reinforcement when transferring forces
