5
Technical Manual - RVL-N Single Wire Loop Box v16.5.2014
www.repo.eu
5
Part
Material
Standard
Steel box
1.0330
SFS-EN 10130
Wire rope
high strength steel wire rope SE-Zn
SFS-EN 12385
Compression sleeve
1.0046
SFS-EN 10025
The steel box and the wire rope are zinc coated. Zinced products are
passivated with min. 1 month of storage.
The steel is box is mechanically cut and bent to shape. The open wire rope is installed to the
steel box and attached by the compression sleeve to form a loop. The wire rope is bent in to
the steel box and the open part of the steel box is closed by tape to protect from casting concrete.
Product package is equipped with a R-Steel –sticker, which contains the following information:
product type, product name, quantity, ISO9001 and ISO14001 quality and environment system
markings, FI marking and product picture.
Products are delivered in cardboard boxes on a truck palette. Cardboard boxes are marked with
FI logo, numbers of the ISO-certificates and the product type and name.
Quality control of the wire rope loops is done according to the requirements of the Finnish
Code of Building Regulations and the instructions according to the quality and environment
system of the R-Group Finland Oy (ISO9001 and ISO 14001). R-Group Finland Oy has a quality
control contract with Inspecta Sertifiointi Oy.
3 MaNUFactURiNg
2.2 mAtErIAls And stAndArds
3.1 mAnufACturIng mEthod
3.2 mAnufACturIng mArkIngs
3.3 QuAlIty Control
5
Part
Material
Standard
Steel box
1.0330
SFS-EN 10130
Wire rope
high strength steel wire rope SE-Zn
SFS-EN 12385
Compression sleeve
1.0046
SFS-EN 10025
The steel box and the wire rope are zinc coated. Zinced products are
passivated with min. 1 month of storage.
The steel is box is mechanically cut and bent to shape. The open wire rope is installed to the
steel box and attached by the compression sleeve to form a loop. The wire rope is bent in to
the steel box and the open part of the steel box is closed by tape to protect from casting concrete.
Product package is equipped with a R-Steel –sticker, which contains the following information:
product type, product name, quantity, ISO9001 and ISO14001 quality and environment system
markings, FI marking and product picture.
Products are delivered in cardboard boxes on a truck palette. Cardboard boxes are marked with
FI logo, numbers of the ISO-certificates and the product type and name.
Quality control of the wire rope loops is done according to the requirements of the Finnish
Code of Building Regulations and the instructions according to the quality and environment
system of the R-Group Finland Oy (ISO9001 and ISO 14001). R-Group Finland Oy has a quality
control contract with Inspecta Sertifiointi Oy.
3 MaNUFactURiNg
2.2 mAtErIAls And stAndArds
3.1 mAnufACturIng mEthod
3.2 mAnufACturIng mArkIngs
3.3 QuAlIty Control
3. Manufacturing