Real Time Automation, Inc.
49
1-800-249-1612
Email Configuration
To setup e-mails on the 460 gateway, navigate to
Other->Email Configuration
.
You can configure up to 10 email addresses.
1)
SMTP Mail Username: The email address that the SMTP server has set up to use.
2)
SMTP Mail Password: If authentication is required, enter the SMTP Server’s password (Optional).
3)
SMTP Server: Enter the Name of the SMTP Server or the IP Address of the Server.
4)
From E-mail: Enter the e-mail that will show up as the sender.
5)
To E-mail: Enter the e-mail that is to receive the e-mail.
6)
E-mail Group: Choose a group for the user. This is used in other web pages.
Click the
Save Parameters
button to commit the changes and reboot the gateway.
