Real Time Automation, Inc.
49
1-800-249-1612
Diagnostics
– EtherNet/IP Scanner
Select the EtherNet/IP Scanner in the dropdown menu on the Diagnostic page to view a breakdown of
the diagnostics and common strings that are displayed on the page. You may also view individual
Adapter counters by selecting the device in the
All Adapters
dropdown and clicking
View
. Additional
diagnostic information can be found by clicking on the
Help
button.
NOTE
: This page will auto-refresh every 5 seconds with the latest data.
Clear All Values
- This will only affect current displayed values.
1)
This will return all values displayed to 0 and clear the Status Strings.
Example: If viewing EtherNet/IP Adapter Address 10.1.54.40, this will only clear the values for that
specific device. This will reduce the overall values indirectly.
Device Status
- This will only display when viewing
All Adapters
.
1)
Connected and Running
–
The gateway is connected to all of the EtherNet/IP Adapters that are
enabled and configured.
2)
Connected and Idle
–
The gateway is connected to all of the EtherNet/IP Adapters that are enabled
and configured but the configured outputs are not yet valid.
3)
Error: Timeout
–
One or more enabled EtherNet/IP Adapters have timeouts.
4)
Fatal Error: No Configuration
–
No EtherNet/IP Adapter devices are configured or devices that are
configured are not enabled.
5)
Unknown: First Scan Not Complete
–
I/O Parameters have been configured for an EtherNet/IP
Adapter but a connection has not been established yet.
6)
Dependency Protocol Faulted
–
The dependent protocol is missing causing the communication to go
inactive.