Real Time Automation, Inc.
50
1-800-249-1612
LED Status
- This is the Status for
All Adapters
or the specific Adapter selected.
1)
Solid Green (Connected)
–
The gateway is connected to all of the EtherNet/IP Adapters that are
configured and enabled.
2)
Solid Green (Connected(Idle))
–
The gateway is connected to all of the EtherNet/IP Adapters that are
configured and enabled, but the configured outputs are not yet valid.
3)
Flashing Green (Not Connected/First Time Scan)
–
The gateway has never been connected to an
EtherNet/IP Adapter that is configured and enabled.
i.
Make sure there are no error codes being returned.
ii.
Make sure the adapter device is configured and online.
4)
Flashing Red (Empty Scan List)
–
No EtherNet/IP Adapters are configured/enabled.
5)
Flashing Red (Connection Timeout) - One or more enabled EtherNet/IP Adapters are timed out or
missing.
i.
Verify that the IP Address of each EtherNet/IP Adapter is valid and is on the same network as
the gateway.
ii.
Verify EtherNet/IP settings and ensure that the
Enable
checkbox is checked for the appropriate
device(s).
iii.
Verify the Instance numbers are valid for each EtherNet/IP Adapter.
6)
Flashing Red (Dependency Error) - The dependent protocol is missing or has errors causing the
communication to go inactive.
i.
The other Protocol must be
Connected
.
7)
Off
–
No Ethernet cable plugged in.
Variables
- These are the values for
All Adapters
or the specific Adapter selected.
1)
Network Bitmap Status (Displayed in Hex):
a.
Each bit corresponds to an Adapter. If the bit is set, the Adapter is connected, otherwise the bit
is 0.
b.
Bit 0 corresponds to Adapter 1 and Bit 4 is for Adapter 5 and so on.
2)
I/O Messages Sent
–
Total number of messages sent to the Adapter device(s).
3)
I/O Messages Received
–
Total number of messages received from the Adapter device(s).
4)
I/O Adapter Timeouts
–
Number of times an I/O Connection has timed out.
5)
I/O Allocation Attempts
–
Number of times the gateway has attempted to allocate a connection.
6)
Successful I/O Allocation
–
Total number of established connections.
7)
Error I/O Allocation
–
Total number of refused connections.
Status Strings
-
These are the values for
All Adapters
or the specific Adapter selected.
1)
Last I/O Allocation Error
–
Displays the last error code received from a ForwardOpen request. See
Error Code Breakdown
section for information about more common errors.
2)
Vendor ID (Device Level only)
–
Displays value from the selected adapter’s Identity Object, Attribute
1.
3)
Device Type (Device Level only)
–
Displays value from the selected adapter’s Identity Objec
t,
Attribute 2.
4)
Product Code (Device Level only)
–
Displays value from the selected adapter’s Identity Object,
Attribute 3.