Real Time Automation, Inc.
35
1-800-249-1612
BACnet/IP Server Object Configuration
– CharacterString Value
Objects
Click the
Set Up BACnet Names, Units, and COV
button at the bottom of the BACnet/IP Server
Configuration page to access the Object Configuration page for this device.
When in Auto-Configure Mode, these fields are not configurable.
Follow these steps to configure CharacterString value reads and writes in Manual Configure Mode:
1)
Select
CharacterString Value Read
or
CharacterString Value Write
from the upper left
dropdown menu.
2)
Select a
Group
to use.
-
These group names are defined on this page und
er the “Group Name” dropdown menu.
3)
Enter a
Name
to identify this object on the network.
-
The combination of
Group
and
Name
should be unique for each point in the gateway.
