Real Time Automation, Inc.
51
1-800-249-1612
Diagnostics
– Alarm Status
Alarm Status will only display under the Diagnostic menu tab if at least 1 Alarm is enabled.
1)
# Alarms Enabled: This is a count of enabled alarms.
2)
# Alarms Active: This is how many alarms are presently active (set).
3)
Last Active Alarm: This is the last alarm that the gateway detected.
4)
Clear # of Times Active
: This will reset all alarms ‘# of Times Active’ to 0.
5)
Alarm #: The reference number to the given alarm on the alarm setup page.
6)
Name: The name of the alarm.
7)
Status: The current status of the alarm, either OK or ALARM.
8)
# of Times Active: This count represents the number of times this alarm has become active. If an
alarm is triggered, this count will increment.
Alarms
– Active
While one or more alarms are active,
every page will display ‘Alarms Active’ at the top of the page
. This
will no longer be displayed if all active alarms have been cleared.
When an alarm is activated, the following will occur:
1)
A one-time notification will be sent out to the email associated with the alarm.
2)
For duplicate emails to occur, the alarm must be cleared and then become active again.
3)
# Alarms Active
and
# of Times Active
will be incremented.
4)
Status of the Individual Alarm will be set to
Alarm
.
5)
Last Active Alarm
field will be populated with details on what triggered the alarm.
