Real Time Automation, Inc.
21
1-800-249-1612
PROFINET IO Server Configuration
Click the
PROFINET IO Server
button to display the configuration page.
1)
Select which
Network Interface
to use for this PROFINET IO connection. If using single port
hardware, the Network Interface will default to Ethernet Port only.
2)
Device Label
: This is the PROFINET name that is assigned by TIA Portal or Classic STEP 7.
Note:
To properly set communication to the PROFINET controller, you will need to install the GSD file
that is downloadable on the configuration web page or on the CD that was shipped with the unit. For
instructions on how to do this, please see the
Setting up the PLC- Example Using Simatic Step 7 software
and
Setting up the PLC- Example Using TIA Portal
sections.
WARNING:
This gateway does not support the assignment of the IP address via the IO controller function. This
function must be disabled for the system to function properly.
