Real Time Automation, Inc.
21
1-800-249-1612
Setting up the PLC- Example Using Simatic Step 7 software
This is how you would set up the
Example Setup
on the previous page using Simatic Step 7:
1)
In your project, click the CPU and you should see the Hardware option in the right pane. Double
click on the Hardware icon.
2)
IF YOU HAVE ALREADY INSTALLED THE GSD FILE, SKIP TO STEP 9.
OTHERWISE - Under Options, select Install GSD Files.
3)
Insert the CD that was shipped with the gateway and select Install GSD Files from the directory.
4)
Browse to the CD and find the folder containing the GSD file.
5)
Select the GSD file from the box and click Install.
6)
When prompted to confirm installation because it cannot be undone, click Yes.
