RTD Embedded Technologies, Inc.
|
www.rtd.com
13
LAN25215HR/LAN35215HR User’s Manual
Connectors
4.3.1
E
XTERNAL
I/O
C
ONNECTORS
The Diagram below shows the connector locations for the transceivers of the LAN25215 as they are brought out on the front panel of the IDAN-
LAN25215. For more information on of each connector on the LAN25215, refer to section 5.3 “Fiber Ethernet Connection” of thi
s manual on
page 15.
Figure 5: IDAN Front Panel Connectors
CN9: Fiber Transceivers
Port 0 Fiber Connector
CN6: Fiber Transceivers
Port 1 Fiber Connector
4.3.2
B
US
C
ONNECTORS
CN1: PCI Connector
The PCI connector is the connection to PCI peripheral modules. This connector is used only as a pass through connector on this board. This
connector is not populated on the LAN35215 version.
CN2/3: PCI-Express Connector
The PCIe connector is the connection to the system CPU. The position and pin assignments are compliant with the
PCI/104-Express
Specification
. (See PC/104 Specifications on page 18)
The LAN25222HR is a “Universal” board, and can connect to either
a Type 1 or Type 2 PCIe/104 connector.
