RK2 Universal System Controller
ii
SAFETY SUGGESTIONS
Read Instructions.
Read all safety and operating instructions
before operating the unit.
Heat.
Keep the unit away from heat sources such as radiators,
heat registers, stoves, etc., including amplifiers that produce heat.
Power Sources.
Connect the unit only to an RTI approved power
supply.
Power Cord Protection.
Route power supply cords so that they
are not likely to be walked on or pinched by items placed on or
against them, paying particular attention to the cords at power
receptacles and at the point at which they exit from the unit.
Nonuse Periods.
Unplug the power supply from the outlet when
the unit is to be left unused for a long period.
Water and Moisture.
Do not use the unit near water—for
example, near a sink, in a wet basement, near a swimming pool,
near an open window, etc.
Object and Liquid Entry.
Do not allow objects to fall or liquids to
be spilled into the enclosure through openings.
Cleaning.
The unit should be cleaned only as recommended in the
operating guide.
Servicing.
Do not attempt any service beyond that described in
the operating guide. Refer all other service needs to qualified
service personnel.
Damage Requiring Service.
The unit should be serviced by
qualified service personnel when:
•
The power supply cord or the plug has been damaged.
•
Objects have fallen or liquid has been spilled into the unit.
•
The unit does not appear to operate normally or exhibits a
marked change in performance.
