T2-C Universal System Controller
6
BATTERY AND DOCKING STATION
The
T2-C
uses a Lithium-Ion rechargeable battery. This battery
does not exhibit any type of “Memory Effect” from being charged
too often. Since the
T2-C
can safely be charged after each use, a
docking station is included for convenience. If left out of the
docking station, the
T2-C
will remain in sleep mode for 1 – 2
months before shutting down. At that point the battery must be
recharged.
The
T2-C
Docking Station can be placed on a flat surface such as a
shelf or table, or it can be mounted to a wall using the mounting
holes on the back of the unit.
If the
T2-C
battery capacity is reduced to approximately 25
percent, a low battery icon will appear in the top center of the
display:
The low battery icon will change color to red if the battery
capacity becomes critically low:
At this point the
T2-C
must be placed into the docking station to
recharge the battery.
The docking station LED illuminates to indicate a charge in
progress. The LED will turn off when the battery in the unit is
fully charged.
A fully discharged battery will take approximately 2-4 hours to
completely re-charge.
The
T2-C
can remain in the docking station indefinitely without
damage to the battery.
