Universal System Controller
T2-Cs+
22
CHAPTER
3 | OPERATION
TILT SWITCH
This button displays a window that allows you to adjust the settings for
the built-in tilt sensor. The tilt switch is a motion detector that turns the
remote on when activated. Press the OK button when finished.
On
means the tilt switch is active and will wake-up the T2-Cs+ when it is
moved.
Off
means the tilt switch is inactive.
TIME OUT
This button displays a window that allows you to adjust the amount of time
the unit stays awake after the last button press. The time is variable from
1 second to 120 seconds (the default is 10 seconds). Press the arrows to
the left or right of the Time Out setting to adjust the time. Press the OK
button when finished.
Note: This setting can have a significant effect on the run-time of the
T2-Cs+ between battery charges. During Sleep mode, the T2-Cs+ uses
virtually no battery power.
