RT
22
0
Qu
ick
U
se
r
Gu
id
e
6. Programming by Command
You can program the barcode reader by commands, the host (your system) send
command to RT220 to control its work, the command is sent in hex, the frequently
used commands listed as below:
Example: you can build a “scan” button of your software interface with the command
0x32 0x75 0x01, then when user clicks the “scan” button, the RT220 begin to read.
For more detailed user guide, please read the
RT220 Configuration tool user guide
,
which also includes the list of all factory default setting in the
section G. Factory
default Setting
.
If you need any other technical support from RTscan, please feel free to contact us:
, thank you!
