Peakmeter series 1206
Page 5-2 Getting started
5.2. Safety symbols
The following symbols may be marked on the panels or covers of equipment
or modules, and are used in this manual:
WARNING! - This symbols alerts you to a potentially hazardous condition,
such as the presence of dangerous voltage that could pose a risk of
electrical shock. Refer to the accompanying Warning Label or Tag, and
exercise extreme caution.
ATTENTION! - This symbols allerts you to important operating
considerations or a potential operating condition that could damage
equipment. If you see this marked on equipment, consult the User´s manual
or Operator manual for precautionary instructions.
FUNCTIONAL EARTH TERMINAL - This symbol marks a terminal that is
electrically connected to a reference point and is intended to be earthed for
any functional purpose other than safety.
PROTECTIVE EARTH TERMINAL - This symbol marks a terminal that is
bonded to conductive parts of the instrument. Confirm that this terminal is
connected to an external protective earthing system.
5.3. Safety information
Please note the following safety instructions before operating the unit.
For continued fire hazard protection, the main power fuse must be replaced
only with one having the correct rating.
There are no operator serviceable parts inside the unit.
DO NOT
attempt to
service unless properly qualified.
Do not remove or replace parts inside the unit without a written permission of
RTW. Modification may cause safety riscs and break CE conformity.
