Getting Started | Working with Instruments and Presets
EN-26
Manual | TouchMonitor TM7/TM9
If you want to load another preset, please proceed as follows:
2. Touch the preset you want to use.
The current selected and used preset is marked as active.
In normal display mode, the name of the active preset is dis-
played in the lower right edge of the screen.
3. The selected preset is loaded. The unit automatically switches
back to normal display mode and displays the selected preset.
1. Touch the
Load Preset
key in the right section of the control bar.
A menu page with a list of presets available is shown.
1.
2.
The Loudness and SPL functions shown on the screen shots
are available with the Loudness and SPL display licence!
