Safety information
•
Read this user guide and follow all instructions, it will help
you set up and operate your product properly.
•
Heed all warnings and keep this user guide for future
reference.
•
Do not attempt to use a damaged device as this could result
in a dangerous electric shock.
•
Do not open the unit or remove any panels to expose the
electronics. No user serviceable parts inside.
•
Refer all servicing to qualified service personnel. Servicing
is required when the device has been damaged in any way,
such as when any power cord, or power plug is damaged,
liquid has been spilled or objects have fallen into the device,
the device has been exposed to rain or moisture, does not
operate normally, or has been dropped.
•
This device is intended to be operated ONLY from the AC
voltages listed on the back panel or included AC mains
adapter. Operation from voltages other than those indicated
may cause irreversible damage to the device and void the
product warranty.
•
Ensure that the mains plug or mains connector into the unit
is readily accessible in case disconnection from the mains is
required.
•
The AC mains adapter, mains plug, or mains connector must
be removed from the socket to completely disconnect the
system from AC mains power.
•
Do not place any naked flame sources, such as lighted
candles, on or near the device. Do not install near any heat
sources such as radiators, stoves, or other devices that
produce heat.
•
Avoid exposure to extreme heat or cold.
•
Only use attachments/accessories specified for this device.
Make no modifications to the system or accessories.
Unauthorised alterations may compromise safety, regulatory
compliance, and system performance.
•
Only use the supplied aerial or an approved replacement.
•
To reduce the risk of fire or electrical shock, do not expose
the device to rain or moisture. Do not expose this device to
dripping or splashing, and do not place objects filled with
liquids, such as vases, on or near the device. As with any
electronic products, use care not to spill liquids into any
part of the system. Liquids can cause a failure and/or a fire
hazard.
•
Disconnect this device from AC mains power during lightning
storms or when unused for long periods of time to prevent
damage to this device.
•
To prevent risk of fire or electric shock, avoid overloading AC
mains power outlets or extension cords.
•
Long-term exposure to loud music may cause hearing
damage. It is best to avoid extreme volume when using
headphones, especially for extended periods.
•
Do not install this device in a confined space. Always leave a
space of at least 10cm around the device for ventilation and
ensure that curtains or other objects never cover ventilation
openings on the device.
Summary of Contents for DYS824-140150W-K
