background image

EN-18

 

Read this user guide and follow all instructions, it will help you set 
up and operate your product properly.

 

Heed all warnings and keep this user guide for future reference.

 

Do not attempt to use a damaged device as this could result in a 
dangerous electric shock.

 

Do not open the unit or remove any panels to expose the 
electronics. No user serviceable parts inside.

 

Refer all servicing to qualified service personnel. Servicing is 
required when the device has been damaged in any way, such as 
power-supply cord or plug is damaged, liquid has been spilled or 
objects have fallen into the device, the device has been exposed to 
rain or moisture, does not operate normally, or has been dropped.

 

This device is intended to be operated ONLY from the AC Voltages 
listed on the back panel or included power supply. Operation from 
other voltages other than those indicated may cause irreversible 
damage to the device and void the product warranty.

 

Use only the power supply provided with the device or an approved 
alternative.

 

Ensure that the power adapter, mains plug or mains connector into 
the unit is readily accessible in case disconnection from the mains 
is required.

 

The mains adapter, mains plug or mains connector must be 
removed from the socket to completely disconnect the system from 
mains power.

 

Liquids can cause a failure and/or a fire hazard. Do not expose this 
device to dripping or splashing, and do not place objects filled with 
liquids, such as vases, on or near the device.

 

Do not place any naked flame sources, such as lighted candles, 
on or near the device. Do not install near any heat sources such 
as radiators, stoves, or other devices (including amplifiers) that 
produce heat.

 

Avoid exposure to extreme heat or cold.

 

Only use attachments/accessories specified for this device. Make 
no modifications to the system or accessories. Unauthorised 
alterations may compromise safety, regulatory compliance, and 
system performance.

 

Only use the supplied aerial or an approved replacement.

 

To reduce the risk of fire or electrical shock, do not expose the 
device to rain or moisture. Do not expose this device to dripping 
or splashing, and do not place objects filled with liquids, such as 
vases, on or near the device. As with any electronic products, use 
care not to spill liquids into any part of the system. Liquids can 
cause a failure and/or a fire hazard.

 

Unplug this device during lightning storms or when unused for long 
periods of time to prevent damage to this device.

 

To prevent risk of fire or electric shock, avoid overloading wall 
outlets, extension cords, or integral convenience receptacles.

 

Long-term exposure to loud music may cause hearing damage. It is 
best to avoid extreme volume when using headphones, especially 
for extended periods.

 

The remote control supplied with this product contains a Lithium 
coin cell battery. Do not swallow. Keep new and used batteries 
away from children. Do not handle leaking or damaged batteries.

 

Long-term exposure to loud music may cause hearing damage. It is 
best to avoid extreme volume when using headphones, especially 
for extended periods.

 

Do not install this device in a confined space. Always leave a space 
of at least 10cm around the device for ventilation and ensure that 
curtains or other objects never cover ventilation openings on the 
device.

Safety and regulatory information

Summary of Contents for R1mk3





















Reviews: