TOOLS
HOW TO:
PREPARE CHARGING BUCkET fOR USE
18” MF Damp Mop • Q410
One Per Assigned Room
Charging Bucket • Q950,
Plus Cleaning
Solution of Choice
TIPS
• Follow all established safety
procedures.
• Wear all appropriate personal
protective equipment (glasses,
gloves, etc.).
• Do not over fill.
PROCEDURE
Each Charging Bucket holds up to 20 damp mop pads: enough for 20 rooms at 1 mop pad
per room.
1
Add water and /or cleaning solution to the Charging Bucket. Each of the Step
Guides inside the Charging Bucket shows the fluid level for 1 quart. 1 quart is
enough solution to saturate 5 mop pads.
Place mop pads in the Charging Bucket with the blue cleaning side down, the white,
logo-imprinted backing side of the pad facing upward.
Secure the leak-proof lid to the Charging Bucket by snapping closed the end
tabs first, then the side tabs.
Flip the Charging Bucket upside down for 5 – 10 minutes, allowing
the cleaning solution to saturate all of the pads. The mopping pads
are now ready for use.
note:
The underside of the Charging Bucket lid has recommended cleaning
solution amounts for use with quantities of 10, 15, and 20 mop pads.
2
3
4
6
7
8
9
5
1
2
3
4
5
6
7
8
9
11
