real time (hour, minute) will disappear. After the power is on again, three
“
0
”
and
“
AUTO
”
shows on the screen, the oven will automatically
reset.
3-keys timer procedure baking mode
(only available on certain models)
Adjust the clock after switch on:
Once it connected with electrical power, the display will show
“
12:00
”
with the square symbol above
“
”
;
Press the
“
+
”
or
“
-
”
button will increase or decrease the number until it reaches the right time; after 5 seconds it will start automatically
or you can press the function button to make it work.
Automatic setting (set the time of full automatic starting and ending)
1. Press the function button repeatedly until the square symbol above the
“
”
flashes, and press
“
+
”
or
“
-
”
button to set the
time frame baking for;
2. Press the function button repeatedly until the square symbol above the
“
”
flashes, and press
“
+
”
or
“
-
”
button to set
the time to switch off;
3. Adjusting the constant temperature button and choosing button to set temperature and baking method.
After these setting, the symbols above the
“
”
and
“
”
will flash, it indicates the baking procedure of oven has been set.
For example: if the food is required to bake for 45 minutes, and it is supposed to stop at 14:00.
Press the function button repeatedly until the square symbol above
“
”
flashes, and set the time of baking to 45 minutes;
Press the function button repeatedly until the square symbol above
“
”
flashed, and set the end time of baking at 14:00.
After these setting, the proper clock (hour, minute) and the square symbol will show on the display, it indicates the setting of baking
procedure has been remembered automatically.
When the clock shows at 13:15 (between 14 -15min), the oven will switch on automatically.
During the baking time frame, the square symbol will keep flashing.
When the clock shows14:00, baking will switch off automatically. The alarm will ring, the square symbol will flash, To stop the ringing
press any button.
Semi-automatic setting (set the time of automatic starting and ending)
A. setting the time frame of baking (10 hours longest)
Press the function button repeatedly until the square symbol above
“
”
, and set the time frame of baking;
Switch on the oven immediately, the square symbol above
“
”
begins to flash. When the baking is done the square symbol above
“
”
will flash, and alarm ring, To stop the ringing press any button.
B. setting the end time off baking (23hours and 59minutes longest)
Press the function button repeatedly until the square symbol above
“
”
flashes, and set the end time of baking;
Switch on the oven immediately, the square symbol above
“
”
begins to flash. When it reaches the time set, baking procedure will
switch off automatically. The square symbol above
“
”
flashes, the alarm will ring, the square symbol will flash. To stop the ringing
press any button.
The set baking procedure could be seen by pressing any function button repeatedly at any time, only if the time frame of baking is at
“
0
”
position. By adjusting the end time of baking to the current time, the set baking procedure can be cancelled.
Timer
The longest time frame can be set is 23 hours and 59 minutes. For setting time, press the function button repeatedly until the square
symbol above
“
”
flashes, and press
“
+
”
or
“
-
”
button until the time supposed shows on the display. After setting, the proper
Summary of Contents for RBO-IA8X-70SS
Page 1: ...RBO IA8X 70SS BUILT IN OVEN...
Page 23: ......
