15
Operating instructions for PODOLOG NOVA 3s | REV. 0
4.
SET-UP
4.1
TECHNICAL SAFETY
–
Before using the device for the first time, you should ensure that mains
power characteristics match the values quoted on the rating plate.
–
Make sure the controller is located on a flat, stable surface.
–
The ventilation slots in the device must be kept uncovered at all times.
–
Avoid damaging the mains cable through squashing, bending or rub
bing against sharp edges.
–
Don’t introduce any fluids into the unit.
–
Protect the device from all types of moisture that could find its way in
side the housing. There is a danger of electrical shock if there is damp
ness in the device!
–
Switch the device off before maintenance and cleaning and unplug it
from the mains power
–
Never immerse the device in water or other fluids.
–
You must remove the plug from the mains immediately, if the device or
hose is damaged or if it starts to function incorrectly.
–
Repairs should only be carried out by qualified repair technicians.
–
If the device is opened, all rights under the terms of the guarantee are
void!
–
See Chapter 7.1 for tools which may be used.
–
The PODOLOG NOVA 3s is a STAND-ALONE device. To avoid elec-
tro-magnetic interference, we do not envisage it being used in conjunc
tion with other devices. Do not position the device directly next to or
with other devices. Should this be necessary, please make sure that all
intended func-tions of the device work properly in this position.
