24
25
MAINTENANCE
6.6.
CHANGING TIRES/TUBES
6.6.1.
DISMOUNTING THE FRONT WHEEL
The wheels are easily dismounted by hanging the Pedelec in a
maintenance support or placing it upside down on the saddle and
handlebar.
Before positioning the bike on the saddle and handlebar, remove the
display and rotate the bell and remote control.
»
Open the quick release by turning over the
handle.
»
Loosen the nut a few turns at the other end
of the quick release. The front wheel is now
slide out from the dropout of the fork.
»
Insert the transportation lock between the
brake pads.
When the wheel is dismounted, do not actuate the hydraulic brake
discs. Otherwise, the calliper pistons may approach each other and
touch.
-> Once you have dismounted the wheel, slide some colored transpor-
tation locks between the brake pads.
MAINTENANCE
6.6.2.
DISMOUNTING THE REAR WHEEL
»
Change into the lowest gear.
»
Loosen and remove the axle as
shown in step 1, 2 and 3.
»
Pull the rear derailleur back and
remove the wheel as shown in step
4 and 5.
»
You can now remove the chain and
take out the rear wheel by moving
and turning it backwards
1
2
3
4
5
