32
33
TECHNICAL DATA
Seatbench
7
Brake adapter on fork or frame
6
Brake caliper on fork or frame
6
Brake discs (6-Bolt)
5 - 7
Brake grip (clamping on handlebar)
max. 4
Lockring chain ring
20 - 25
Crank on Bosch-Axle
35
Axle screw on rear wheel hub
8 - 10
Pedals
30 - 35
10.
LIABILITY FOR MATERIAL DEFECTS
LIABILITY FOR MATERIAL DEFECTS
A statutory liability for material defects is applicable for a period of 24 months
as from the day of purchase.
The prerequisite for the assertion of material defects liability shall be the
submission of the original invoice and proven inspections.
The assertion of material defects is subject to the following prerequisites:
»
The presence of a manufacturing, material or information fault.
»
The claimed damage was already existent at the time of the transfer.
»
The product was not altered due to wear or ageing.
»
The damages were not originated by any use other than the intended use.
»
Battery: The battery has a remaining nominal capacity of less than 60% after
a maximum of 500 charge cycles .
The warranty shall not include:
»
any wear parts as stated in the wear parts list, provided they are not produc-
tion or material defects.
»
Damages caused by the non-intended use
»
Damages caused by the non-compliance of the procedures described in the
“Maintenance” chapter
»
Damages caused by the neglectful use of repair tools and lacking mainte-
nance.
»
Damages caused by the use of used parts
»
Damages caused by the additional mounting of standard features or due to
technical retrofitting.
11.
EC DECLARATION OF CONFORMITY