RUG DOCTOR PRO
®
MOTORIZED UPHOLSTERY CLEANING TOOL
|
U s e r M a n u a l
6
4
1
1
2
2
3
3
5
Attach Upholstery Tool to Handle
Plug in the machine
Raise the
Main Handle
Open the
Vacuum
Hose Port
Make sure Handle
of the Pro Deep
Cleaner is in the
upright position
(as seen above)
until handle locks
securely.
Pull the black
rubber flap
upward to open
the Vacuum Hose Port.
Add Cleaning
Solution
Add Rug Doctor
Cleaning Solution
and warm water to
the Clean Water
Tank as per the
cleaning solution
instructions.
Connect the
Solution Hose
Insert the
Solution
Hose into
the Solution
Hose Port
(marked “B”).
Check the
Power Button
Make sure the Power Button
is in the “off” position.
Connect the
Vacuum Hose
Insert the
Vacuum Hose
Cuff into the
Vacuum Hose
Port (marked
“A”).
Once separate from
the machine, connect
the Motorized
Upholstery Tool & Tool
Handle (as pictured
above). Press the
two pieces together
firmly to assure a tight
connection
Insert plug into a properly
grounded outlet.
PREPARING TO CLEAN
How to use:
IMPORTANT CLEANING TIP:
Vacuum/clean area with a dry vacuum or microfiber mop thoroughly
before deep cleaning. Always test in inconspicuous area with small amount of cleaner before using.
CONNECT THE HOSES
CAUTION
Before plugging
machine in check
the Power Button to
make sure it is in the
“off” position.
