R U G D O C T O R P E T P O R TA B L E S P O T C L E A N E R
|
U s e r M a n u a l
10
HOW TO CLEAN
1
2
Plug In The Power Cord
Lift the Dual Action Pet
Tool from Machine and
completely unwrap the
flexible hose.
With Machine powered ON, position
the Dual Action Pet Tool in
front of the stain or area
you want to deep clean.
For optimal cleaning, position
the head of the Dual Action Pet Tool at a slight
angle to ensure the front nozzle is touching the surface.
3
4
Prepare To Clean
Turn Power On
5
6
1. Squeeze and hold the Soap Trigger to spray Rug
Doctor cleaning solution over and onto the soiled area.
2. Pull backwards SLOWLY over
the soiled area to clean.
3. Release the Soap Trigger
when complete.
4. Repeat as needed.
Take it slow! Slower action
allows the Dual Action Pet Tool and suction power to
clean deeper.
To Lift The Stain
To Clean
Press the power button
to the ON position.
Prepare The Machine
CAUTION
Before plugging Machine in, check the power
button to make sure it is in the OFF position.
1. Rotate the cord wrap
hooks on the back of
Machine to release
the power cord
(unwrap completely).
2. Plug into a grounded outlet.
Excess solution can be removed by making additional “dry”
passes with the Dual Action Pet Tool without squeezing
the Soap Trigger.
1.
Release the Soap Trigger.
2.
Apply downward pressure on the Dual
Action Pet Tool and slowly move
tool over the soiled area to remove
remaining moisture.
3.
Repeat as needed.
Before plugging Machine in, check the
POWER BUTTON
to make sure it is in the
OFF position.
CAUTION
15
Seconds
After cleaning: best practices
Keep Machine ON 15 seconds after cleaning to allow for all of
the dirty solution to be collected into the Waste Water Tank.
WARNING
TO REDUCE RISK OF FIRE, ELECTRIC SHOCK, INJURY TO PERSONS, OR PROPERTY DAMAGE, FOLLOW ALL
IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES CONTAINED IN THIS USER MANUAL.
