w w w . r u g d o c t o r. c o m . a u
|
1 8 0 0 8 0 4 9 7 3
9
PRE-TREATING HEAVILY STAINED OR SOILED AREAS
1
2
Plug In The Power Cord
Prepare To Use Machine
Press the power button
to the ON position.
Hold the Dual Action Pet
Tool just above the area to
be cleaned. Press the Soap
Trigger to mist solution over
the soiled area.
3
4
Pre-Treat
Turn Power On
IMPORTANT:
Check the manufacturer’s tag before cleaning upholstery. “W” or “WS” on the tag means you can use
Machine. If tag is coded with an “S” or “X”, says “Dry Clean Only”, is coded with any non-colour-fast fabric, is missing, or
not coded, do not proceed.
Lift the Dual Action Pet
Tool from Machine and
completely unwrap the
flexible hose.
Let cleaning solution set for 5 minutes
before cleaning.
5
Let Solution Set For 5 Minutes
REMEMBER
Always use RUG DOCTOR cleaning solutions.
Other cleaning solutions may harm Machine
and void the warranty.
Fill with hot tap water.
DO NOT USE BOILING WATER! DO NOT
HEAT WATER OR TANK IN MICROWAVE!
Why pre-treat? Cleaning effectiveness will be enhanced if you pre-treat
heavily stained or highly soiled areas.
CAUTION
Before plugging Machine in, check the power
button to make sure it is in the OFF position.
1. Rotate the cord wrap hooks
on the back of Machine
to release the power cord
(unwrap completely).
2. Plug into a grounded outlet.
