r u g d o c t o r. c o m
|
1 - 8 0 0 - 7 8 4 - 3 6 2 8
7
Plug in the Machine
1
2
3
4
5
6
7
Insert plug into a properly
grounded outlet.
Turn on the Machine
.
Press the Power Button
located on the Main Handle
to Tool mode. The Tool
Brush will spin when power
is turned on.
Cleaning Your Hard Floors
.
Press the Trigger on the
Handle/Hose to apply
solution while making 2
slow wet passes (1 forward
and 1 back) over each area.
Release the Trigger.
Make 2 slow dry passes
(1 forward and 1 back) to
suck up the dirty solution
(do not hold down the
Trigger for this step).
Repeat as necessary.
Wait
.
Leave the Machine running
for 15 seconds after cleaning
to allow for all of the dirty
solution to be collected in
the Dirty Water Tank.
Turn Off the Machine
.
Press the Power Button
located on the Main
Handle to “Off” position.
Position the Tool
.
Position the Hard Floor
Cleaning Tool over the area
or stain that you want to
clean.
Now You’re Ready to Clean
CLEANING YOUR HARD FLOORS
How to Use:
CAUTION
Before plugging
Machine in, check
the Power Button
to make sure it
is in the “off”
position.
