Customer Operation and Safety Guide
RugDoctor Support: 1-800-784-3628 |
Page 1 of 3
Machine/Tool ID:
WT-R PDH1 Floor Dryer
Vendor:
Rug Doctor
Vendor Website:
Mfg. Support Phone No.:
1-800-784-3628
Tool Application:
Dries Carpet 2X Faster than drying alone under normal conditions. Ideal for regular carpet
cleaning AND drying floors when sump pumps fail or basements flood.
Operation Guide: Read all instructions completely before you begin.
USER MUST CAREFULLY READ AND FULLY UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS MACHINE.
Before
operating the machine (including any attachments), renter agrees to fully read, understand, and follow all safety warnings
and instructions set forth below, which can be found on Rug Doctor’s website (
BEFORE USE:
1.
Inspect power cord for fraying, cuts or damage; do not use if damaged.
2.
Remove lint or obstructions from the Intake Guard and Exhaust Port Guard using a vacuum or compressed air.
3.
Inspect exterior components (switch, knob, etc.) for damage.
USING THE MACHINE
1
Plug in to a standard outlet with the correct voltage and amperage for the unit. An extension cord should never be used for the
machine.
2
Use only on GFCI protected receptacles.
3
Place the machine in the desired operating position.
4
The machine can be used in multiple positions. The PDH1 model can be used in the vertical position (Figure 1) and the
horizontal position (Figure 2).
5
WARNING!
To ensure objects are not sucked against the intake guard during operation and decrease airflow, do not place
items in front of the intake guard. Clean the intake area regularly. Make sure the machine can breathe. The machine should be
positioned so that air can easily flow into the machine without obstruction. Any blockage of the intake areas can cause
overheating and a meltdown.
6
Set the switch at the desired speed:
LOW - I, MEDIUM - I I, or HIGH - I I I
7
WARNING!
Do not move or carry the machine when it is running. Always turn machine off and unplug power cord before
moving. NEVER leave the machine unattended or running overnight. For even drying, move the fan every hour or two.
