Cutting Centre SR 2 Turbo
10
The machine may not be commissioned without transport
belt!
The following is strictly prohibited and anyone disregard-
ing this prohibition acts gross negligently when:
Lifting the lamellae of the protective guard on the
knife protection box during operation and reaching
into the cutting chamber!
Operating the machine without rear wall or tool
magazine!
Manipulating the protective devices of the machine
or deactivating them!
Working on the machine without the rear wall installed or
without the tool magazine installed is permitted only for a
Rühle service technician during maintenance!
The operator must make sure that
No persons, who do not know the hazards of the ma-
chine or cannot anticipate them, are about in the
area of the machine!
When loading the lifting aid, the Euro boxes must be
stacked on an undercarriage suitable for this pur-
pose and moved with it onto the lifting aid to ensure
the Euro boxes are held securely!
The upper box on the lifting aid is not lifted higher
than the worktable!
The feather key is placed in the guide groove when
installing the transport belt!
The control panel may only be operated by touching it
with the fingers. Using any objects (e.g. blade) is prohib-
ited!
The self-lubrication control function must be activated by
a Rühle service technician or person authorised by Rühle
prior to initial commissioning!
After each change of the cut-off knife or grate the cut-off
knife must be turned clockwise 2 times by means of the
handle nut to ensure that it does not collide with the
grate frame or the knife levels!
Observe the display information!
