Cutting Centre SR 2 Turbo
16
5.3
Repair and spare parts
As a damaged part on a machine is usually damaged due to causes
unrelated to the part, always carry out a fault diagnosis.
For this reason, contact our Service Hotline at +49 7748-523-11 for
spare parts or technical faults. Please keep the machine type and
number ready.
6
Disposal
1.
The following components contain oil:
Main drive for cutting
Dispose of the oil properly!
2.
The following components contain lubricating grease:
DC drive for the pre-pressing function
Free-wheeling rollers
Dispose of the lubricating grease properly!
3.
The following components contain lubricating oil:
All chains and their gear
Dispose of the lubricating grease properly!
4.
All other materials must be sorted and disposed of at a recy-
cling facility!
7
Technical documentation
7.1
Technical data
Connection voltage:
400 V 50 Hz 3-phase AC / N / PE
Power consumption:
5.1 kW
Full-load current:
10.6 A
Back-up fuse max.:
16 A
Protection class:
IP54
Ambient temperature:
+2 °C to + 40 °C
