Cutting machine AR 10
4
a)
Completely read and understand these operating instructions
before transport, commissioning, setup, operation, cleaning,
decommissioning, care/maintenance as well as disman-
tling/disposal!
b)
Prepare work instructions for intended and safe transport,
commissioning, setup, operation, cleaning, decommissioning,
care/maintenance as well as dismantling/disposal!
c)
Ensure that the qualified workers have completely read and
understood the respective work instructions according to sec-
tion 1.1b!
d)
Proper functioning of the protective devices must be checked
at least once a year by a Rühle service engineer!
e)
Provide personal protective equipment!
All life cycle phases:
Use foot protection according to EN ISO 20345!
(e.g.
recommended for butcher stores, dairies, meat and fish
processing: safety boots S4 with steel cap)
Use hand protection according to EN ISO 388!
(e.g.
gloves with high cutting/puncture resistance)
Wear protective clothing according to EN ISO
13688!
(E.g. appropriate aprons/coats/overalls)
Cleaning; care/maintenance; dismantling:
Use eye protection according to EN ISO 166!
(e.g.
tightly closing safety goggles)
Use light breathing masks according to EN ISO
149!
(e.g.
simple breathing mask protection class FFP1)
Use hand protection according to EN ISO 374!
(
Acid-resistant, butyl rubber, Viton)
Wear protective clothing according to EN ISO
13688, EN ISO 17491!
(E.g. appropriate coats/overalls)
[The information on the proposed personal protective equip-
ment has only an advisory function. A full risk assessment
should be carried out before using the product to assess
whether the indicated personal protective equipment is
suitable for local conditions. Personal protective equipment
should conform to the relevant EU standards.]
