LaserCuttistV1.2 Laser Cutting system
RuiDa Technology E-Mail:
support@rd-acs.com
1TH FLOOR,5TH BUILDING,NANYOU
TIANAN INDUSTRIAL ZONE,SHENZHEN
Web:
www.rd-acs.com
Phone: (086)0755-26066687
FAX: 0755-2698287
37
Picture 2-22 Making cut order manually
When you opened the dialog, the curve elements will display in the display window. The jump and cut path
will be displayed in the window. The sequence of the curve element described in Ar
abic numerals
is displayed in
the window too.
You can use the cursor to click on the curve element. The element’s name will be displayed in the right bar.
Using
can add the selected left curve element to the right bar. Using
can add all the curve elements to the
right. Using
can restore all the curve element in the right to the left. Using
can made a
reverse sequence of all the curve elements
。
Using
can make a reverse cutting direction in one curve element
。
Using
and
can modify the element’s sequence in the right bar.
Click
, and move the cursor to the curve polygon point, then double click the mouse, a new cut
start point is generated. User can use the function to change the cut start point.
3Inner and outer mold
：
