LaserCuttistV1.2 Laser Cutting system
RuiDa Technology E-Mail:
support@rd-acs.com
1TH FLOOR,5TH BUILDING,NANYOU
TIANAN INDUSTRIAL ZONE,SHENZHEN
Web:
www.rd-acs.com
Phone: (086)0755-26066687
FAX: 0755-2698287
42
2)
Self-intersect check
：
If a closed curve is
self-intersect, lasercuttist will separate the curve.
3)
Intersect check
：
To check the curves is
intersect or not. If there are intersections, lasercuttist will automatically merge the
intersection line.
4)
Data overlap check
：
To check the curve is overlap or not. If there are overlapping, lasercuttist will delete the overlapping lines.
Notice:
this operation will made a closed curve to be a un-closed curve.
10 Cut simulation
：
There is a simulation if the cutting process. Shown as picture 2-27.
Picture 2-27 Cutting simulation
2.2.6
Menu—Coordinate
There are 3 coordinate for the machine. One is
absolute coordinate. Another coordinate is the current
position. The other is the orientation point. Shown as picture 2-28.
Picture2-28 Coordinate manager
Absolute coordinate
：
Under the absolute coordinate, The machine home position is the reference point for the curves. So when the
machine is power on , lasercuttist must run a home action to find the machine original point.
Current point
：
