LaserCuttistV1.2 Laser Cutting system
RuiDa Technology E-Mail:
support@rd-acs.com
1TH FLOOR,5TH BUILDING,NANYOU
TIANAN INDUSTRIAL ZONE,SHENZHEN
Web:
www.rd-acs.com
Phone: (086)0755-26066687
FAX: 0755-2698287
58
Picture 3-12 stop point set
The X,Y position that displayed in the dialog is the laser head current location. You can set the laser head current
position to be the stop point. You still can set any position on the cut area to be the stop point. Click” mouse to
set” and click any position on the cut area with the left key. The current point X, Y position will displayed on the
dialog. Lasercuttist will consider the point as the stop point. The stop point is displayed with the red target.
3.2.2 File import
Lasercuttist support the *.plt
；
*.ai
；
*.dxf
；
NC code. When you import a PLT or a DXF file, you should set
the data unit. As is shown in picture 3-13.
Picture3-13File import option
The default PLT precision is 1016. The default unit of DXF is mm. you can change to cm.
Curve information and attribute
Importing a data file, user can get the file information and attribute. Polygon lines can be seen if you click
“view-display node”. As is shown in picture 3-14.
