LaserCuttistV1.2 Laser Cutting system
RuiDa Technology E-Mail:
support@rd-acs.com
1TH FLOOR,5TH BUILDING,NANYOU
TIANAN INDUSTRIAL ZONE,SHENZHEN
Web:
www.rd-acs.com
Phone: (086)0755-26066687
FAX: 0755-2698287
61
Click” modify—data check”, the dialog will appeared. As is shown in picture 3-18
Picture3-18 Data check and revise
Select some or all the curve elements, then execute a data check. The check result will display in the dialog.
When the distance between the polygon line and another polygon line is less than the close error limit,
lasercuttist will close the two polygon lines automatically.
When some polygon lines are self- intersection, lasercuttist will handle the self-cross and cross polygon lines
if you have selected the deal self-cross and deal cross.
When the vertical distance of two polygon lines is less than the overlap error limit, Laser cuttist will delete
the two polygon lines automatically if deal overlap is selected.
Notice
：
When the curves has been selected, the data check can be executed.
。
3.2.3 Parameter set
The parameters of lasercuttist are include of machine parameter and cut parameter.
1 Machine Parameters
Click the “Parameter ---machine parameter”, the dialog will be opened. As is shown in picture 3-18.
