LaserCuttistV1.2 Laser Cutting system
RuiDa Technology E-Mail:
support@rd-acs.com
1TH FLOOR,5TH BUILDING,NANYOU
TIANAN INDUSTRIAL ZONE,SHENZHEN
Web:
www.rd-acs.com
Phone: (086)0755-26066687
FAX: 0755-2698287
68
Picture 3-23 Introducing line
arc
Picture 3-24 Introducing arc of inner mold
The length of the arc can be set.
The attribute of the above curves is inner mold (the internal area is
garbage
). The introducing lines is
happened in the garbage area. If user forces to modify the curve to be outer mold, then lasercuttist will
force to change the introducing lines. As is shown in picture 3-25.
Picture 3-25 Introducing arc, line of a outer mold
Two ways to adding the introducing lines
:
Automatic
Automatically adding introducing line is in the” handle—add introducing line”. As is shown in
picture 3-25.