LaserCuttistV1.2 Laser Cutting system
RuiDa Technology E-Mail:
support@rd-acs.com
1TH FLOOR,5TH BUILDING,NANYOU
TIANAN INDUSTRIAL ZONE,SHENZHEN
Web:
www.rd-acs.com
Phone: (086)0755-26066687
FAX: 0755-2698287
70
Picture3-27 Add introducing line manually
Notice
：
If the attribute of the curve is inner mold, the introducing line can be only added
inside of the outline of the curve.
Introducing pin-in-out line edit
：
Whatever introducing pin-in line or introducing pin-out line, they can be edited again. When user has
added the introducing lines, the introducing lines are in the edit status. A cross cursor is displayed
with the mouse cursor. So you can move the cursor to the green or blue rectangle at the terminal of
the introducing lines. Press down the left key of the mouse and drag the introducing line to wherever
you want to drag. Press the right key of the mouse can escape from the introducing line edit status.
You can press the
tool to edit the introducing status. Then the cross cursor will appears
and the introducing lines are in the edit status.
Notice
：
When modifying introducing lines, lasercuttsit will judge the position that the
introducing line is added automatically according to the inner and the outer mold. If the position is
illegal, the introducing line will be not allowed to be added.
Delete the introducing pin-in-out lines
：
Before deleting the introducing pin-in-out lines, You must selected the curves. Click
