Installation
2-7
Figure 2-4 Fixing the Antenna
1 Antenna
2 Clamp
3 Pole (with a diameter
of 40 to 70 mm)
Connecting to the AP and Performing Waterproof Treatment
Connect the other end of the feeder cable to the AP port.
Connect the 2.4GHz/5.8GHz feeder ports of the RG-ANTx3-2400&5800(O) to the 2.4G-1, 2.4G-2, 2.4G-3/ 5G-1, 5G-2,
5G-3 ports of the AP630 with no sequence. Perform waterproof treatment on the feeder connection point by referring to
section
Installing the Feeder and Performing Waterproof Treatment
. After waterproof treatment, fix the feeder with the
pole and other cables with cable ties.
When you use external antennas, configure the RG-AP630 to work in external antenna working mode. For detailed
configuration commands, see the
RG-WLAN Series Wireless Access Point RGOS Configuration Guide
.
