RG-S2600G-I Series Switch Hardware Installation and Reference Guide
Note
1. Grounding rod
2. Three-hole AC power
connector
3. Cable plug retention clips
Power Supply
The RG-S2652G-I adopts the AC power input.
AC
input:
Rated voltage range: 100-240 V
Maximum voltage range: 90-264 V
Frequency: 50/60 Hz
Rated current: 0.6 A
Power cord specification: 10 A power cord
HVDC
input:
Input voltage range: 192 to 290 VDC
Input current range: 0.2 to 0.12 A
Heat Dissipation
The RG-S2652G-I is designed with no fans. To ensure good dissipation, sufficient ventilation space (10cm distance from
both sides and the back panel of the chassis) should be reserved to avoid the air intake of the chassis being blocked;
otherwise, the dissipation might be affected. Dust the device every three months to avoid blocking the ventilation
openings.
LED Indicators
Indicator
Faceplate
Marker
Status
Indication
Off
The switch is not powered on.
Blinking green
The switch is being initialized. If the blinking
persists, however, it indicates that an
abnormality occurs.
Solid green
The switch is in normal operation.
Status indicator
Status
Solid yellow
It indicates a warning on the switch
temperature. Check the working environment of