RG-S2600G-I Series Switch Hardware Installation and Reference Guide
Preparation before Installation
Safety Suggestions
To avoid personal injury and equipment damage, please carefully read the safety suggestions before you
install the RG-S2600G-I series.
The following safety suggestions do not cover all possible dangers.
Safety Precautions for Installing the System
Keep the chassis clean and free from any dust.
Do not place the equipment in a walking area.
Do not wear loose clothes or any other things that may be caught by the chassis during installation and
maintenance.
Turn off all power supplies and remove the power sockets and cables before dismantling the cabinet.
Movement Safety
Do not frequently move the device.
When moving the device, note the balance and avoid hurting legs and feet or straining the back.
Before moving the device, turn off all power supplies and dismantle all power modules.
Electric Safety
Observe local regulations and specifications when performing electric operations. Relevant operators must be
qualified.
Carefully check any potential danger in the working area, such as ungrounded power supply, unreliable grounding of
the power supply, and damp/wet ground or floor.
Find out the location of the emergency power supply switch in the room before installation. First cut off the power
supply in the case of an accident.
Try to avoid maintaining the switch that is powered-on alone.
Be sure to make a careful check before you shut down the power supply.
Do not place the equipment in a damp location. Do not let any liquid enter the chassis.
1. Any nonstandard and inaccurate electric operation may cause an accident such as fire or electrical shock,
thus causing severe even fatal damages to human bodies and equipment.
