RG-S2600G-I Series Switch Hardware Installation and Reference Guide
Maintenance and Troubleshooting
General Troubleshooting Procedure
Troubleshooting Common Faults
Symptom
Possible Causes
Solution
Forgetting the management
interface login password
Please contact Ruijie Networks
Customer Service Department for
technical support.
The status indicator is not on after
the switch is started.
The power supply module does not
supply power.
The power cable is in loose contact.
Check whether the power socket
at the equipment room is normal
and whether the power cable of
the switch is in good contact.
The status indicator is red.
Temperature alarm
At this time, the switch already
stops the normal service
exchanges. Check in time the
working environment of the
switch, clean the dust on the
cabinet and reinforce the
refrigeration effect.