another. Conducted interference often affects the power supply of the equipment, but can be controlled by a filter.
Radiated interference may affect any signal path in the equipment, and is difficult to shield.
Effective measures should be taken for the power system to prevent the interference from the electric grid.
The working ground of the device should be properly separated and kept as far as possible from the grounding
device of the power equipment or the anti-lightning grounding device.
Keep the equipment away from high-power radio transmitter, radar transmitting station, and high-frequency
large-current device.
Measures must be taken to isolate static electricity.
2.3 Installation Tool
Common tools
Cross screwdriver, straight screwdriver, related electric and optical cables
Bolts, diagonal pliers, straps
Special-purpose tools
Anti-static tool, anti-static glove, stripping pliers, crimping pliers, crimping pliers for the
crystal head, wire cutter
Fiber optic cleaning tools
Air-laid paper, fiber end microscope
Meter
Multimeter, Errormeter, Optic-power meter
RG-WALL1600-S3100 is not shipped with a tool kit. The tool kit is customer-supplied.
2.4 Unpacking Requirements
Goods Checklist
Installation Kit
USB cables, Ethernet cables, power cables, power adapters and optical disk containing tools and
documents.
A normal delivery should contain the above mentioned items, which may differ from the actual delivery, depending
on purchase contracts. Please check your goods carefully against the packing list or purchase contract. If you have
any questions or there are any errors, please contact your distributor.
